Honor 9 lite lld-l31 FRP BYPASS made simple: TEST point method unlocks with ease
I can guide you through the general steps of performing an FRP (Factory Reset Protection) bypass using the "Test Point" method on the Honor 9 Lite LLD-L31. Please note that FRP bypass methods can change over time due to software updates, so always ensure you are using the most up-to-date and reliable methods.
Important Note: FRP bypassing is typically used for legitimate reasons, such as regaining access to a device that you own but have forgotten the Google account credentials for. Performing FRP bypass for illegal purposes, such as accessing a stolen device, is against the law and unethical. Make sure you are using this information responsibly and for lawful reasons.
Here are the general steps to perform the Test Point method for Honor 9 Lite LLD-L31 FRP bypass:
1. Preparation:
- Ensure that you have a Windows PC and a good quality USB cable.
- Download and install the necessary drivers for your Honor 9 Lite on your PC.
- Download and extract the required software and tools, such as "SP Flash Tool" and the firmware specific to your device model and region.
2. Backup:
- Before proceeding with any FRP bypass method, it's crucial to back up any essential data on your device, as the process might erase all data.
3. Download the Necessary Files:
- Look for the specific firmware and SP Flash Tool files that correspond to your device model and region on reputable websites or forums.
4. Enter Fastboot/Bootloader Mode:
- Turn off your Honor 9 Lite and boot it into Fastboot or Bootloader mode by pressing and holding the Volume Down and Power buttons simultaneously.
5. Identify Test Points:
- To use the Test Point method, you'll need to locate the Test Points on your device's hardware. These are usually tiny copper or metal points on the motherboard.
- The exact locations of Test Points can vary depending on the device, so search for guides or images specifically for the Honor 9 Lite LLD-L31.
6. Connect Test Points:
- Once you've identified the Test Points, connect them using a conductive material (e.g., a metal tweezer) while keeping the device connected to the PC via USB.
Tuitoral: https://youtube.com/shorts/f2AodP7oszw
7. Flash the Firmware:
- Open SP Flash Tool on your PC and load the downloaded firmware files.
- Follow the instructions to flash the firmware to your device. The Test Point connection will help the tool recognize the device and begin the flashing process.
8. Remove Test Point and Power On:
- After the flashing process is complete, carefully disconnect the Test Points from your device.
- Now, power on your Honor 9 Lite normally.
9. Complete the Setup:
- Follow the device setup instructions until you reach the Google Account verification step.
- Since you flashed new firmware, you should not encounter FRP lock, and you can set up your device without entering the previous Google account details.
Please remember that the Test Point method is quite advanced and can be risky if not done correctly. It's essential to follow detailed and reputable guides specific to your device model and region. Additionally, always ensure you have the legal right to perform these actions on your device.
As the FRP bypass methods can change with software updates or new security measures, always stay informed by checking reliable sources and communities for the latest techniques.
No comments: