Infinix X604 [Note 5] DA File Factory/FRP Reset Guide using CM2MT2
Introduction:
In this blog post, we will guide you through the process of performing a factory reset and FRP (Factory Reset Protection) reset on the Infinix X604, also known as Note 5, using the CM2MT2 tool. The DA (Download Agent) file will be an essential part of this process, ensuring a smooth and successful reset. Please note that these methods should only be used if you have the proper authorization to reset the device and are familiar with the risks involved.
Disclaimer:
Performing a factory reset and FRP reset may result in the loss of all data on the device. It is essential to back up all important data before proceeding. Additionally, the methods described here are intended for educational purposes only, and we are not responsible for any damage that may occur during the process.
Requirements:
1. Infinix X604 [Note 5] device with sufficient battery charge.
2. USB cable.
3. Computer with the CM2MT2 tool installed.
4. DA File compatible with the Infinix X604 [Note 5].
5. Patience and attention to detail.
Step-by-Step Guide:
Step 1: Download Required Files
- Obtain the CM2MT2 tool and install it on your computer.
- Find and download the specific DA File compatible with the Infinix X604 [Note 5].
Step 2: Prepare Your Device
- Charge your Infinix X604 [Note 5] to ensure it has enough power to complete the reset process.
- Backup all essential data to prevent any potential data loss during the reset.
Step 3: Enter Factory Mode
- Power off your device completely.
- Press and hold the Volume Down and Power buttons simultaneously until the Infinix logo appears on the screen.
- Release the buttons and wait for the Factory Mode menu to appear.
Step 4: Connect Your Device to the Computer
- Using a USB cable, connect your Infinix X604 [Note 5] to the computer.
Step 5: Launch CM2MT2 Tool
- Open the CM2MT2 tool on your computer.
Step 6: Load DA File
- In the CM2MT2 tool, click on the "Choose" or "Load" button and select the previously downloaded DA File compatible with the Infinix X604 [Note 5].
Step 7: Begin FRP Reset
- Once the DA File is successfully loaded, select the "Format" tab in the CM2MT2 tool.
- From the drop-down menu, choose "Auto Format Flash."
- Click on the "Start" or "Format" button to initiate the FRP reset process.
Step 8: Wait for Completion
- The CM2MT2 tool will begin the factory reset and FRP reset process.
- Do not disconnect your device during this process, as it may cause permanent damage.
Step 9: Reset Complete
- After the process is complete, the tool will display a success message.
- Your Infinix X604 [Note 5] is now successfully reset, and the FRP lock has been removed.
Conclusion:
Congratulations! You have successfully performed a factory reset and FRP reset on your Infinix X604 [Note 5] using the CM2MT2 tool and a compatible DA File. Remember to set up your device again, and if necessary, restore your data from the backup you created earlier. Please exercise caution when performing such operations and ensure that you have the right authorization to reset the device.
No comments: